Thanks for the reply.
I actually, finally, found what I was looking for in the manual.
The answer is you click on any open cell under End 1 in the wires box and then
right click. That brings up a dialog box which allows you to edit the
connections.
It’s easy once you know where to look!
Bob
Robert L. Chortek
On Mar 9, 2020, at 8:07 PM, Mike Waters <mikewate@gmail.com> wrote:
[External Email]
There are some .ez antenna files included. One of them is a vertical with a
ground plane, which you can customize.
73, Mike
W0BTU
On Mon, Mar 9, 2020, 10:03 PM Chortek, Robert L.
<Robert.Chortek@berliner.com<mailto:Robert.Chortek@berliner.com>> wrote:
I’ve just downloaded the demo version of EZNEC and I am working through the
tutorials. I’m trying to model a vertical with four elevated radials on 160
m. The problem I’m having is I can’t figure out how to separate the radials
from the vertical and put the source at the base of the vertical and the
radials. All five wires are connected and I can’t separate them.
I spent a great deal of time reading through the manual and using the help
function but for the life of me I simply cannot find where the manual discusses
how to modify (edit) the “connections”. Can somebody point me to the right
place? I certainly can’t find it.
Bob AA6VB
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|