The choke bleeds off static charges that accumulate on the vertical. While
I have witnessed noise from huge static charging to a 32 foot vertical
mounted on the roof of the engineering building at Texas Tech in West
Texas, the choke does not bleed off “noise”. Noise is radio frequency
emissions from noise sources which can be local or distant.
Chuck W5PR
On Wed, Dec 19, 2018 at 12:19 PM Jamie WW3S <ww3s@zoominternet.net> wrote:
> Since verticals are know to be "noisy" on receive, and a fix is a rf choke
> or bleeder resistor to ground, anyone try that on short verticals used for
> receive only to quiet some noise?
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband
> Reflector
>
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|