Mike,
That’s the plan, however it’s warm in the shack and bitter cold outside.
Thanks,
Jim – KR9U
From: Mike Waters [mailto:mikewate@gmail.com]
Sent: Sunday, February 22, 2015 9:01 PM
To: jbwolf@comcast.net
Cc: topband
Subject: Re: Topband: Modeling a BOG
Thanks. I see what you mean! That's not much of a pattern.
I'm far from being an NEC expert. But everything I've ever read indicates that
ANY version of NEC is simply not yet advanced to the point where it can model
wires close to the earth with any degree of accuracy.
Why don't you lay a 200' wire on the ground, aimed towards your area of
interest? Bury the radials at each end (no more than an inch or two), and see
what you can hear? :-)
73, Mike
www.w0btu.com
On Sat, Feb 21, 2015 at 11:05 PM, James Wolf <jbwolf@comcast.net> wrote:
Here is a PDF that has the plots and the NEC Model.
http://www.wolfrfsystems.com/BOG.pdf
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|