TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TenTec] din connector, etc.

from [Jim Brown] [Permanent Link][Original]
To: tentec@contesting.com
Subject: Re: [TenTec] din connector, etc.
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 24 Sep 2014 15:26:50 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com> 
On Wed,9/24/2014 1:45 PM, Carl Moreschi wrote:
The amp is energized immediately. The delay is just for RF, not amp switch to transmit.
Right -- that's the way most transceivers have worked for several decades. But please answer my questions (previous email) about how QSK is wonderful for you, because I don't understand how it can be above about 18 WPM if the TX delay is 17 msec. :) 

73, Jim K9YC


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TenTec] din connector, etc. - AMP Keying, Jim Vohland
Next by Date:  Re: [TenTec] din connector, etc., Jim Allen
Previous by Thread:  Re: [TenTec] din connector, etc., Carl Moreschi
Next by Thread:  Re: [TenTec] din connector, etc., Carl Moreschi
Indexes:  [Date] [Thread] [Top] [All Lists]