Hi Guys,
Thank You to everyone who responded to my N1MM Logger+ ESM question. In
the future, I will try to do as you say and watch to make sure Logger+ is
"cycling thru the 3 stages" before I press the Enter key.
73,
Dick- K9OM
In a message dated 7/18/2016 11:03:58 A.M. Central Daylight Time,
rtty-request@contesting.com writes:
Send RTTY mailing list submissions to
rtty@contesting.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.contesting.com/mailman/listinfo/rtty
or, via email, send a message with subject or body 'help' to
rtty-request@contesting.com
You can reach the person managing the list at
rtty-owner@contesting.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of RTTY digest..."
Today's Topics:
1. N1MM Exch Message when using ESM? (RLVZ@aol.com)
2. Re: N1MM Exch Message when using ESM? (Larry Gauthier (K8UT))
3. Re: N1MM Exch Message when using ESM? (Richard Ferch)
4. Re: N1MM Exch Message when using ESM? (David Levine)
----------------------------------------------------------------------
Message: 1
Date: Mon, 18 Jul 2016 00:11:50 -0400
From: RLVZ@aol.com
To: rtty@contesting.com
Cc: rlvz@aol.com
Subject: [RTTY] N1MM Exch Message when using ESM?
Message-ID: <3c78c2.18567794.44bdb106@aol.com>
Content-Type: text/plain; charset="US-ASCII"
Hi Guys,
I was going to post my question on the N1MM logger+ Digital reflector,
but
since Don brought up a related subject, and since rtty@contesting .com is
easier for me to post messages on, I'd like to ask the following question
about N1MM Logger+:
For this weekends NAQP-RTTY Test, I was using N1MM Logger+ V.1.0.5785.0
(which I believe is the latest version) and using ESM. ESM worked
flawlessly
when running stations. But while hunting MULTS in S&P mode I frequently
had problems. After entering the other stations Callsign in the Callsign
field and pressing "Enter" the first time, ESM would always send my
Callsign
just as it should. But after filling the logging fields with the proper
received message and then pressing "Enter" the second time in order to
send
my exchange and automatically log the Qso, about 30% of the time Logger+
sent my Callsign again rather than sending my report and logging the Q.
That
really messed me up and may have cost me logging some Q's because of it.
So I'm wondering if anyone else experienced a similar problem?
Thanks & 73,
Dick- K9OM
In a message dated 7/17/2016 11:16:18 A.M. Central Daylight Time,
rtty-request@contesting.com writes:
Message: 1
Date: Sat, 16 Jul 2016 17:58:33 -0500
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: "'RTTY Reflector'" <rtty@contesting.com>
Subject: [RTTY] N1MM Exch Message when using ESM?
Message-ID: <000d01d1dfb5$950bfb00$bf23f100$@net>
Content-Type: text/plain; charset="us-ascii"
OK, I give up. How do your properly set up your F2 (EXCH) RUN message when
using ESM?
I want to send the other station's callsign ONCE with my report starting
on
a new line.
Thanks,
Don AA5AU
------------------------------
Message: 2
Date: Mon, 18 Jul 2016 06:23:19 -0400
From: "Larry Gauthier \(K8UT\)" <K8UT@charter.net>
To: <RLVZ@aol.com>, <rtty@contesting.com>
Cc: <rlvz@aol.com>
Subject: Re: [RTTY] N1MM Exch Message when using ESM?
Message-ID: <0550F7CFA86C4ACEB35BD60A2D271EE1@K8UTPC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Dick,
I have not experienced the problem you described, but it sounds as if it
is
related to N1MM's cycle though the three stages of an S&P ESM QSO. Watch
the
highlighted Function Key buttons to make sure the Entry Window has
advanced
to the next stage:
Stage #1. F4 CALL HIM - Enter sends the MyCallKey message when the
callsign
field is empty or contains a legitimate callsign
Stage #2 F8 AGAIN? - Enter sends the AgainKey message when the exchange
field(s) does not contain a valid contest exchange. (NOTE: This stage is
bypassed when the "contest" rules do not require an exchange - for example
a
DX dxpedition contest)
Stage #3. F2 EXCHANGE and LOG-IT - Enter sends the ExchangeKey message and
logs the QSO
The key to debugging your problem will be in identifying proper stage
sequencing in the Entry Window.
-larry (K8UT)
-----Original Message-----
From: RLVZ--- via RTTY
Sent: Monday, July 18, 2016 12:11 AM
To: rtty@contesting.com
Cc: rlvz@aol.com
Subject: [RTTY] N1MM Exch Message when using ESM?
Hi Guys,
I was going to post my question on the N1MM logger+ Digital reflector, but
since Don brought up a related subject, and since rtty@contesting .com is
easier for me to post messages on, I'd like to ask the following question
about N1MM Logger+:
For this weekends NAQP-RTTY Test, I was using N1MM Logger+ V.1.0.5785.0
(which I believe is the latest version) and using ESM. ESM worked
flawlessly
when running stations. But while hunting MULTS in S&P mode I frequently
had problems. After entering the other stations Callsign in the Callsign
field and pressing "Enter" the first time, ESM would always send my
Callsign
just as it should. But after filling the logging fields with the proper
received message and then pressing "Enter" the second time in order to
send
my exchange and automatically log the Qso, about 30% of the time Logger+
sent my Callsign again rather than sending my report and logging the Q.
That
really messed me up and may have cost me logging some Q's because of it.
So I'm wondering if anyone else experienced a similar problem?
Thanks & 73,
Dick- K9OM
In a message dated 7/17/2016 11:16:18 A.M. Central Daylight Time,
rtty-request@contesting.com writes:
Message: 1
Date: Sat, 16 Jul 2016 17:58:33 -0500
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: "'RTTY Reflector'" <rtty@contesting.com>
Subject: [RTTY] N1MM Exch Message when using ESM?
Message-ID: <000d01d1dfb5$950bfb00$bf23f100$@net>
Content-Type: text/plain; charset="us-ascii"
OK, I give up. How do your properly set up your F2 (EXCH) RUN message when
using ESM?
I want to send the other station's callsign ONCE with my report starting
on
a new line.
Thanks,
Don AA5AU
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
------------------------------
Message: 3
Date: Mon, 18 Jul 2016 10:28:59 -0400
From: Richard Ferch <ve3iay@gmail.com>
To: rtty@contesting.com
Subject: Re: [RTTY] N1MM Exch Message when using ESM?
Message-ID:
<CAJ-xeHmwnE_LU4BSJ0v5snLUhsMEDZTRjX9HaiMvXX8+rOPj_g@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Dick,
I have been caught by something similar from time to time. The key is to be
aware of where the ESM focus is. It is not always where you think it is,
especially if you have to make any corrections to prefilled exchange data,
and that can throw things off.
I believe the problem you experienced arises because the typing focus moves
when you use the mouse to overwrite a prefilled exchange element (prefilled
either from a previous QSO or from a Call History file), or (if I have
remembered this correctly) when you just enter exchange data into an empty
exchange box using the mouse. This focus movement is useful if the element
you entered or corrected was the name (it moves the focus to the state so
you can enter or correct it in turn). However, if the prefilled state was
wrong and you corrected it by clicking on the received state, or if you
have just entered the state into an empty exchange by clicking on the
received state, after doing that the typing focus automatically moves to
the next box, which in this case is the call sign box. When the focus is on
the call sign box in S&P, ESM will send the F4 message, which is not what
you want.
Therefore after correcting or entering the state by clicking in the receive
window, if you see that the typing focus is in the call sign, or
equivalently that ESM highlight is on F4, you need to move the focus from
the call sign back into the exchange. The easiest way to do this is with
the Space bar. Once you do this, ESM will send the TU (F3) message and log
the contact when you press Enter.
73,
Rich VE3KI
K9OM wrote:
For this weekends NAQP-RTTY Test, I was using N1MM Logger+ V.1.0.5785.0
(which I believe is the latest version) and using ESM. ESM worked
flawlessly
when running stations. But while hunting MULTS in S&P mode I frequently
had problems. After entering the other stations Callsign in the Callsign
field and pressing "Enter" the first time, ESM would always send my
Callsign
just as it should. But after filling the logging fields with the proper
received message and then pressing "Enter" the second time in order to
send
my exchange and automatically log the Qso, about 30% of the time Logger+
sent my Callsign again rather than sending my report and logging the Q.
That
really messed me up and may have cost me logging some Q's because of it.
So I'm wondering if anyone else experienced a similar problem?
------------------------------
Message: 4
Date: Mon, 18 Jul 2016 11:19:32 -0400
From: David Levine <david@levinecentral.com>
To: RLVZ@aol.com
Cc: rtty@contesting.com
Subject: Re: [RTTY] N1MM Exch Message when using ESM?
Message-ID:
<CAGu77J_gVFp5eDbsKW3pJJ+wWrqZYbBn0UFUOTHT7466Y9cz2w@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
I experienced this a couple times during the contest. I don't use the
keyboard much and do it all with the mouse, but the "Right click=Enter"
option should duplicate the experience.
I know why it occurs but not what I did to put the cursor into that
position. It happens when the cursor is in the call sign field when
Enter/Right Click is sent. I'm not sure what I did when clicking through
the other operators name/state. I only handled a hair over 300 calls in the
NAQP and it might have happened 5-8 times. Unfortunately, I'm not watching
the Entry window but watching the digital window so I'm not sure what I
did, assuming it's not an application issue, to cause it.
But you aren't alone if that makes you feel better.
David - K2DSL
On Mon, Jul 18, 2016 at 12:11 AM, RLVZ--- via RTTY <rtty@contesting.com>
wrote:
> Hi Guys,
>
> I was going to post my question on the N1MM logger+ Digital reflector,
but
> since Don brought up a related subject, and since rtty@contesting .com
is
> easier for me to post messages on, I'd like to ask the following
question
> about N1MM Logger+:
>
> For this weekends NAQP-RTTY Test, I was using N1MM Logger+ V.1.0.5785.0
> (which I believe is the latest version) and using ESM. ESM worked
> flawlessly
> when running stations. But while hunting MULTS in S&P mode I frequently
> had problems. After entering the other stations Callsign in the
Callsign
> field and pressing "Enter" the first time, ESM would always send my
> Callsign
> just as it should. But after filling the logging fields with the proper
> received message and then pressing "Enter" the second time in order to
> send
> my exchange and automatically log the Qso, about 30% of the time
Logger+
> sent my Callsign again rather than sending my report and logging the Q.
> That
> really messed me up and may have cost me logging some Q's because of it.
> So I'm wondering if anyone else experienced a similar problem?
>
> Thanks & 73,
> Dick- K9OM
>
>
>
> In a message dated 7/17/2016 11:16:18 A.M. Central Daylight Time,
> rtty-request@contesting.com writes:
>
> Message: 1
> Date: Sat, 16 Jul 2016 17:58:33 -0500
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "'RTTY Reflector'" <rtty@contesting.com>
> Subject: [RTTY] N1MM Exch Message when using ESM?
> Message-ID: <000d01d1dfb5$950bfb00$bf23f100$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> OK, I give up. How do your properly set up your F2 (EXCH) RUN message
when
> using ESM?
>
> I want to send the other station's callsign ONCE with my report starting
> on
> a new line.
>
> Thanks,
> Don AA5AU
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
------------------------------
Subject: Digest Footer
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
------------------------------
End of RTTY Digest, Vol 163, Issue 15
*************************************
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|