RTTY
[Top] [All Lists]

Re: [RTTY] Hints and tips on how to file comments on RM-11708

To: "Joe Subich, W4TV" <lists@subich.com>
Subject: Re: [RTTY] Hints and tips on how to file comments on RM-11708
From: Kok Chen <chen@mac.com>
Date: Sun, 24 Nov 2013 19:02:19 -0800
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
On Nov 24, 2013, at 6:28 PM, Joe Subich, W4TV wrote:

> The Commission believed that a 1000 Hz shift and 300 baud symbol
> rate would assure emissions consistent with "traditional radio-
> teleprinter bandwidths" would provide for bandwidths consistent
> with then standard operating practice.

1000 Hz shift and 300 baud symbol rate (old rules) will occupy no less than 
about 1300 Hz bandwidth.  You realize that, don't you?

By judicious waveshaping, we can probably get down to 1200 Hz bandwidth, but 
there is no way to get it an FSK bandwidth to be below the shift itself  -- 
1000 Hz.  

So, 500 Hz definitely does not mesh with the current rules.

73
Chen, W7AY



_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>