Hello Gordon,
Keep "Bambi", but go to VT. Missed the VT mult. in the recent NAQP:>)
Regarding the sending of the other stations call at the start of a run QSO,
this is what I've been recently using:
- Hit the F2 macro programed as %R%C exchange %E which translates to Line
feed, his call, exchange, end of transmission. This is used when there
isn't anyone else calling and the call is solid on the screen.
- Hit F2 then F5 This sends the F2 macro above followed by %C %E as
programmed in F5. F5 translates to his call, end of transmission. The
extra his call is sent when there may have been two calls or I may have
started transmission before he actually ended calling me.
- Hit F2 the F6. F6 is %C?? %E which translates to his call, "??", end
of transmission. This combination is used when there is some question on
having copied the correct call.
If the run station didn't get your call correct, please send it at the
beginning and end of your response transmission. If the run station still
didn't get the call correct, then too bad for him as, I believe, the log
checking programs will not credit the run station with the QSO, but the
answering station does get credit since the answering station got all the
information correct.
Regarding confirming a QSO with the answering station, I've been using:
- F3 macro of %R%C TU%RK4GMH CQ %E. This translates to line feed, his
call, "TU", line feed, "K4GMH CQ", end of transmission.
In the recent NAQP, the initial "his call" was not sent as this was mostly a
domestic contest and the signals were okay for the most part. So the NAQP
F3 macro was: %RTU K4GMH CQ %E. When a call correction was made during the
information exchange part of a NAQP QSO, the F5 macro button was hit
followed by hitting F3. This macro combination sent %C %RTU K4GMH CQ %E.
This let the other station know I got his call correct. Sometimes, while I
am running, a station will send the wrong call, e.g. K4GM rather than
K4GMH. Then I'll send my F4 macro, %B%BK4GMH K4GMH (the "%B%B" will not
allow the F4 macro to be sent if the station already has been worked) before
my F3 macro to emphasize my call. Again, if the other station still doesn't
get my call correct, hopefully the log checking program will give me credit
for the QSO since I got all the correct information logged.
Responding to a run station, the F7 macro (S&P) I use is: %R%C TU exchange
%L%E. This is line feed, his call, "TU", exchange, log the QSO, end
transmission. This lets the run station know I have his call correct.
This is what I've been recently using. The above will be tampered with,
from time to time, to "improve" obtaining a quick and successful exchange
of the critical contest information.
Whether these are optimum exchanges is a decision to be made by each
operator. YMMV
On Tue, Mar 1, 2011 at 6:02 AM, Gordon LaPoint <n1mgo1@verizon.net> wrote:
> Gary,
> We use "Bambi" because using our names was too confusing! We always
> run Multi-2,
> and the rules state that you can send each operators name, as they operate.
> When we
> tried that we got people telling us that we were "Charlie" or "Gordon" ,
> not what we had
> just sent. We were operating from a hunting camp in the green mts. of VT
> then so we
> switched to one name, "Bambi" and have been Bambi for years now! Very well
> known by lots
> of RTTY operators as Bambi.
>
> The "Bambi" team, Gordon - N1MGO, Charlie - KT1I, Ray- KB1LRL, Pauline -
> KB1JXJ, and
> others some years!
>
> Thanks for all the contacts over the years!
>
> What would you suggest we use as a name?
>
> Gordon - N1MGO
>
>
> On 28 Feb 2011 at 9:37, Gary AL9A wrote:
>
> > If you want to talk about overkill, then you needed to work the guy who
> sent
> > his state as MINNESOTA. I guess he figures everyone out there is too
> dumb
> > to comprehend what MN means despite the fact that we all have to manually
> > type MN in the state field as no amount of mouse clicking is going to
> make
> > MINNESOTA fit into a 2 position field! Another favorite was the guy in
> MA
> > sending his name as BAMBI. Needed lots of AGNs to get that one right.
> > Finally, for those using the first name of AL, don't! Use ALLEN or ALAN,
> > but please not ALFONSO!
> >
> > 73,
> > Gary AL9A
> >
> >
> > ----- Original Message -----
> > From: "Jim Reisert AD1C" <jjreisert@alum.mit.edu>
> > To: "RTTY Reflector" <rtty@contesting.com>
> > Sent: February 27, 2011 8:06 PM
> > Subject: Re: [RTTY] Three lessons from NAQP
> >
> >
> > On Sun, Feb 27, 2011 at 6:20 PM, Jim Reisert AD1C
> > <jjreisert@alum.mit.edu> wrote:
> >
> > I forgot one:
> >
> > 4. Use the standard 2-letter postal abbreviation for your state or
> > province. Don't spell it out, and don't put punctuation after it!
> > One station sent something like:
> >
> > <name> SS. <name> SS,
> >
> > so there was no way to click on the state abbreviation (SS) and *not*
> > get the period or comma along with it, at least in WriteLog.
> >
> > I won't even get started about the guy who separated the two copies of
> > his exchange with:
> >
> > <space><hyphen><space>
> >
> > Talk about overkill!
> >
> > --
> > Jim Reisert AD1C, <jjreisert@alum.mit.edu>, http://www.ad1c.us
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
--
73,
Mike, K4GMH
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|