I Had a sl 2011cd plus ext running in a WET11 w/ the Turbocell code for
2 weeks and then the card died, replaced w/ the stock card and the WET11
was fine.
I also have a wet11 w/ the 200mw card from mikrotik (which would over
heat in rg1000) has been running FINE w/ the wet11
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Kevin Knuth
> Sent: Saturday, August 02, 2003 1:30 PM
> To: Norm Young; Karlnet Mailing List
> Subject: RE: Ubicom TC Units and factory reset
> issues/questions, WET11's-was RE: [Karlnet] ofdm in 2.4ghz?
>
>
> I have NO CLUE if the WET11's can handle the higher power cards.
>
> Kevin
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Norm Young
> Sent: Saturday, August 02, 2003 12:07 PM
> To: bradlists@mnns.com; Karlnet Mailing List
> Subject: Re: Ubicom TC Units and factory reset issues/questions,
> WET11's- was RE: [Karlnet] ofdm in 2.4ghz?
>
>
> So, since the Ubicom/WET11 units have PRISM 2.5 radios in
> them, I wonder if it would be possible to substitute the
> higher power versions of those radios, i.e.; a 100mW PRISM
> 2.5 radio? I have just a few customers who could benefit
> from such a swap.
>
> Norm
>
>
> ----- Original Message -----
> From: "Brad Gass" <bradlists@mnns.com>
> To: "Karlnet Mailing List" <karlnet@WISPNotes.com>
> Sent: Friday, August 01, 2003 10:19 PM
> Subject: Ubicom TC Units and factory reset issues/questions,
> WET11's - was
> RE: [Karlnet] ofdm in 2.4ghz?
>
>
> > The WET11's I have had have a PCMCIA PRISM 2.5 (or 3, not
> totally sure
> > actually) cards in them - as well as the KarlNet converted Hawking
> > Tech units from Charles. In fact, with the exception of the RPSMA
> > connector location, the board layout appears nearly
> identical to the
> > Hawking Tech units. In that respect, FWIW, I prefer the WET11's.
> >
> > As a side (non KarlNet related note), has anyone taken
> their WET11's
> > apart and flashed the FW up to 1.7.4 in the radio cards?
> The WET11's
> > I've had come through the office I've all flashed up card
> and unit FW
> > before redeploying them elsewhere, and they at least seem
> more stable
> > and predictable than before.
> >
> > On a KarlNet related note, I do appear to have an oddball
> issue with
> > at least one of the Ubicom units I'm doing field trials on. It
> > sporadically loses it's configuration and returns to the factory
> > settings. This particular unit I have velcro'd to a window
> facing one
> > of my COR/BASE's that's 150 yards away, perfect line of
> sight, 27dB+
> > SNR. It's on a window right next to a door that's the primary
> > entrance to the house, and it does get a little vibration
> if the door
> > is closed hard - but not much, certainly no more that something
> > sitting on a desk or computer that gets knocked around
> occasionally.
> > The only observations are that 1) How does the "init"
> switch work with
> > the KarlNet FW - is their any delay required after initial
> actuation
> > before the unit actually returns to factory defaults? My
> thinking is
> > that maybe the vibration from the door was actuating it
> possibly. And
> > 2) perhaps it's a power glitch issue from the vibration, in
> > combination with it triggering something in the software.
> >
> > My question to KarlNet is (assuming they'll tell us) - what
> sequence
> > of events has to happen in software to return the unit to factory
> > defaults? Are the software routines for "factory reset" executed
> > immediately on startup, or is there some kind of "wait for
> power and
> > switch inputs to settle before doing anything" delay? If it were a
> > switch actuation due to vibration, I could just desolder it and be
> > done with it really. But if it's a wait or debounce issue,
> I'm sort
> > of out.
> >
> > I know this is an oddball case, and I've not been able to
> reproduce it
> > reliably, not even by repeated firm tapping on the housing
> or closing
> > the door hard, but I know it's happening on this particular install
> > regularly (every few days), and if I can't track it down,
> I'll either
> > have to replace the bridge or move it elsewhere in the
> house and see
> > what happens.
> >
> >
> > Brad
> >
> > > Aren't the wet11's broadcom based? Isn't that an NDIS type system?
> > >
> > >> -----Original Message-----
> > >> From: karlnet-bounces@WISPNotes.com
> > >> [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of Kevin Knuth
> > >> Sent: Friday, August 01, 2003 6:10 PM
> > >> To: Karlnet Mailing List
> > >> Subject: RE: [Karlnet] ofdm in 2.4ghz?
> > >>
> > >>
> > >> The NDIS driver we have ONLY works with AGERE chipsets- not
> > >> Broadcom.
> > >>
> > >> Kevin
> > >>
> > >> -----Original Message-----
> > >> From: karlnet-bounces@WISPNotes.com
> > >> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Dan Metcalf
> > >> Sent: Thursday, July 31, 2003 11:36 PM
> > >> To: 'Karlnet Mailing List'
> > >> Subject: RE: [Karlnet] ofdm in 2.4ghz?
> > >>
> > >>
> > >> Kevin,
> > >>
> > >> What about the 802.11g radio's from broadcom (isn't
> broadcom used
> > >> in your NDIS hardware solution?)
> > >>
> > >> Dan
> > >>
> > >>
> > >> > -----Original Message-----
> > >> > From: karlnet-bounces@WISPNotes.com
> > >> [mailto:karlnet-bounces@WISPNotes.com]
> > >> > On Behalf Of Kevin Knuth
> > >> > Sent: Thursday, July 31, 2003 2:43 PM
> > >> > To: Karlnet Mailing List
> > >> > Subject: RE: [Karlnet] ofdm in 2.4ghz?
> > >> >
> > >> > All,
> > >> >
> > >> > We are planning on supporting the Atheros radios.
> However- there
> > >> > is
> > >> some
> > >> > concern about wether they will pass outdoor certification.
> > >> We should
> > >> know
> > >> > more in the next few weeks on that issue, and I will try to
> > >> keep you
> > >> > aprised.
> > >> >
> > >> > Kevin
> > >> >
> > >> > -----Original Message-----
> > >> > From: karlnet-bounces@WISPNotes.com
> > >> > [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of
> Bruno Lopes F.
> > >> Cabral
> > >> > Sent: Thursday, July 31, 2003 8:18 AM
> > >> > To: Karlnet Mailing List
> > >> > Subject: Re: [Karlnet] ofdm in 2.4ghz?
> > >> >
> > >> >
> > >> > > Any chance of karlnet support the new ofdm 2.4ghz radio's?
> > >> >
> > >> > Hi there
> > >> >
> > >> > I made the exact same question about newer proxym "g" radios a
> > >> > few days ago, and got no answer
> > >> >
> > >> > if it will be suported, when and which cards would be used?
> > >> >
> > >> > side note: I heard about new proxym sylver cards
> doesn't have the
> > >> > external antennae connector anymore. only the gold cards have.
> > >> > can anyone confirm this?
> > >> >
> > >> > Cheers
> > >> > !3runo
> > >> > from Brazil
> > >> >
> > >> > _______________________________________________
> > >> > Karlnet mailing list
> > >> > Karlnet@WISPNotes.com
> > >> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >> >
> > >> >
> > >> > _______________________________________________
> > >> > Karlnet mailing list
> > >> > Karlnet@WISPNotes.com
> > >> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >> > --
> > >> > [This E-mail scanned for viruses by Declude Virus]
> > >>
> > >>
> > >> --
> > >> [This E-mail scanned for viruses by Declude Virus]
> > >>
> > >> _______________________________________________
> > >> Karlnet mailing list
> > >> Karlnet@WISPNotes.com
> > >> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >>
> > >> Karlnet mailing list
> > >> Karlnet@WISPNotes.com
> > >> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> > >> --
> > >> [This
> > >> E-mail scanned for viruses by Declude Virus]
> > >>
> > >>
> > >
> > > --
> > > [This E-mail scanned for viruses by Declude Virus]
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
>
>
>
> _______________________________________________
>
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/ka> rlnet
> --
> [This
> E-mail scanned for viruses by Declude Virus]
>
>
--
[This E-mail scanned for viruses by Declude Virus]
|