First,
Sorry for the typo on the name! Been one of those days!
We will have auto-roam for TurboCell satellites in our next release, due
out first week in January. That feature is in our test lab as we speak.
This is mentioned in our release notes for version 4.27 (available for
download at www.karlnet.com).
Kevin
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Darko Budor
Sent: Thursday, December 19, 2002 2:07 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] RG-1100 END OF LIFE!
On Thu, Dec 19, 2002 at 01:37:47PM -0500, Kevin Knuth wrote:
> Dukor,
Huh?
> I am suprised you cannot change the frequency remotely. Latency should
not
> be the issue, it sounds much more like an RF issue. Regardless of the
> software, you still have to have good RF for wireless to work well.
Well of course it's an RF issue. Why do you think I wanted to change the
frequency anyway?
Now, hold your breath and read this twice befoure you tell me again that
it's an RF issue.
Look at this scenario:
1. I setup a link that's working ok.
2. Some a**hole puts another link on the same freq and no karlnet some 50ft
away from the CPE location.
3. I have 900ms RTT, and 10% packet loss.
4. I have to drive there to change the bloody channel.
Look what could help me:
1. changing channel with a single SNMP set request.
2. command line interface. Telnet works fine with 900ms RTT and 10%loss.
3. satellites should IMHO pick the frequency from the base
4. teleport
brgs,
--
Darko Budor <budor (at) vodatel (dot) hr>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|