On Thu, Dec 19, 2002 at 01:37:47PM -0500, Kevin Knuth wrote:
> Dukor,
Huh?
> I am suprised you cannot change the frequency remotely. Latency should not
> be the issue, it sounds much more like an RF issue. Regardless of the
> software, you still have to have good RF for wireless to work well.
Well of course it's an RF issue. Why do you think I wanted to change the
frequency anyway?
Now, hold your breath and read this twice befoure you tell me again that
it's an RF issue.
Look at this scenario:
1. I setup a link that's working ok.
2. Some a**hole puts another link on the same freq and no karlnet some 50ft
away from the CPE location.
3. I have 900ms RTT, and 10% packet loss.
4. I have to drive there to change the bloody channel.
Look what could help me:
1. changing channel with a single SNMP set request.
2. command line interface. Telnet works fine with 900ms RTT and 10%loss.
3. satellites should IMHO pick the frequency from the base
4. teleport
brgs,
--
Darko Budor <budor (at) vodatel (dot) hr>
|