In most cases the wireless link test and TurboCell Station entries will give
you the same results. The only time they won't is when the wireless link
test does Auto fallback. When it does auto fallback then the radio signal
will be higher, since TurboCell is set statically.
Doug
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of nate
> Sent: Sunday, September 22, 2002 5:35 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] 802.11b on karlnet
>
>
> I would think that doing a Wireless Link test on that AP would
> give you the
> same results as doing it in Turbocell mode....
> I dont have one running but I would think you would get the same results.
>
> Nate
>
> > I'm running a karlnet AP in 802.11b mode, how can I bring up a list
> > of linked clients?
> >
> > Dan Metcalf
> > Wireless Broadband Systems
> > http://www.wbsysnet.com/
> > 877-685-0578
> > dan.metcalf@wbsysnet.com
> >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> > On
> > > Behalf Of Charles Chia Sheng Wu
> > > Sent: Friday, September 20, 2002 10:39 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: RE: [Karlnet] RG-1100 Ethernet Question??
> > >
> > > same as grounding a piece of coax or waveguide
> > >
> > > put in a lightening arrestor, and take it to ground
> > >
> > > -Charles
> > >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com]On
> > > Behalf Of Nate McLain
> > > Sent: Friday, September 20, 2002 9:27 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: RE: [Karlnet] RG-1100 Ethernet Question??
> > >
> > >
> > > How exactly would you go about grounding the Cat5 cable anyway??
> > > Even if you wanted too....
> > > Just use a Network Suppressor and take it to ground or what??
> > >
> > > Maybe Im trying to make it too difficult.....
> > >
> > > Nate
> > >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com
> > [mailto:karlnet-admin@WISPNotes.com]On
> > > Behalf Of Charles Chia Sheng Wu
> > > Sent: Friday, September 20, 2002 9:22 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: RE: [Karlnet] RG-1100 Ethernet Question??
> > >
> > >
> > > >Who's code??
> > >
> > > NEC
> > >
> > > >And what exactly are you grounding outside?? The enclosure? Antenna?
> > > Cat5?
> > >
> > > the CAT-5 at the entrypoint...but- we aren't completely compliant
> > > either...
> > >
> > > -Charles
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > >
> > >
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > ---
> > > [This E-mail scanned for viruses by Declude Virus]
> >
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
> --
> Open WebMail Project (http://openwebmail.org)
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|