RE: [Karlnet] performance issue's on ap1000 when using isp base

[Roger Boggs <rogerboggs@att.net>]

40 percent drop.  WEP/No WEP?  Encryption on or off can easily cost you
20 percent of throughput.

At 07:04 PM 9/4/02 -0400, you wrote:
> Roger,
>
> Yes we see a performance issue when we switched the AP configuration
> from Normal polling to ISP Base w/ protocol filtering.
>
> Basically the throughput of the radio dropped by over 20% from around
> 5megs to about 3megs
>
> Also we are using the Firewall Set too, so I'm not sure if the CPU is
> just maxing out
>
> Dan Metcalf
> Wireless Broadband Systems
> http://www.wbsysnet.com/
> 877-685-0578
> dan.metcalf@wbsysnet.com
>
>
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
> On
> > Behalf Of Roger Boggs
> > Sent: Wednesday, September 04, 2002 6:06 PM
> > To: karlnet@WISPNotes.com
> > Subject: RE: [Karlnet] performance issue's on ap1000 when using isp
> base
> >
> > What do you mean, Dan?  A difference between a regular
> > "Base Station" and an "ISP Base Station"?
> >
> > Since you called it an "issue", I'll assume that you mean the ISP Base
> > Station
> > is not performing nearly as well as the "Base Station/Normal Polling"
> > configuration.
> >
> > What are the performance differences?
> >
> >
> > At 05:47 PM 9/4/02 -0400, you wrote:
> > >I have seen a noticeable performance issue when switching ap over to
> isp
> > >base instead of normal polling

Roger Boggs