Roger,
Yes we see a performance issue when we switched the AP configuration
from Normal polling to ISP Base w/ protocol filtering.
Basically the throughput of the radio dropped by over 20% from around
5megs to about 3megs
Also we are using the Firewall Set too, so I'm not sure if the CPU is
just maxing out
Dan Metcalf
Wireless Broadband Systems
http://www.wbsysnet.com/
877-685-0578
dan.metcalf@wbsysnet.com
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Roger Boggs
> Sent: Wednesday, September 04, 2002 6:06 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] performance issue's on ap1000 when using isp
base
>
> What do you mean, Dan? A difference between a regular
> "Base Station" and an "ISP Base Station"?
>
> Since you called it an "issue", I'll assume that you mean the ISP Base
> Station
> is not performing nearly as well as the "Base Station/Normal Polling"
> configuration.
>
> What are the performance differences?
>
>
> At 05:47 PM 9/4/02 -0400, you wrote:
> >I have seen a noticeable performance issue when switching ap over to
isp
> >base instead of normal polling
>
> Roger Boggs
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]
---
[This E-mail scanned for viruses by Declude Virus]
|