Lets say it's a weak or low signal from the client, would anything on
the client indicate this?
Dan Metcalf
Wireless Broadband Sytems
dan.metcalf@wbsysnet.com
www.wirelessbroadbandsystems.com
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Roger Boggs
> Sent: Wednesday, July 24, 2002 12:07 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] FCS errors
>
> No, that isn't necessarily the case. This is indicating to you that
the
> AP1000 wireless interface is having a difficult time hearing the
client.
> Probable causes are interference or insufficient signal. If it's
> interference,
> the problem won't necessarily affect the client since it may be coming
> from
> a different direction or the source is closer to the AP than the
client.
>
>
> At 11:54 AM 7/24/02 -0400, you wrote:
>
> >I have an ap1000 which is on radio B. and we are seeing a very HIGH #
of
> >FCS errors (In errors). There is only 1 CPE on this radio, should I
see
> >the same # errors on the Outside of the CPE?
> >
> >Dan Metcalf
>
> RB
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]
---
[This E-mail scanned for viruses by Declude Virus]
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet