No, that isn't necessarily the case. This is indicating to you that the
AP1000 wireless interface is having a difficult time hearing the client.
Probable causes are interference or insufficient signal. If it's interference,
the problem won't necessarily affect the client since it may be coming from
a different direction or the source is closer to the AP than the client.
At 11:54 AM 7/24/02 -0400, you wrote:
I have an ap1000 which is on radio B. and we are seeing a very HIGH # of
FCS errors (In errors). There is only 1 CPE on this radio, should I see
the same # errors on the Outside of the CPE?
Dan Metcalf
RB
|