What about if there are multiple internal machines that you want to connect
to?
----- Original Message -----
From: "Phil" <phil@ingineerix.com>
To: <karlnet@WISPNotes.com>
Sent: Wednesday, July 17, 2002 10:15 AM
Subject: Re: [Karlnet] PCAnywhere - HOWTO
> Yes, map Ports 5631-TCP and 5632-UDP to the internal IP of the machine you
want to connect to.
>
> To do this, turn on "Network Address Translation Redirector" in the
"General Setup" menu, then open the "Network Address Translation
> Redirector Setup" menu and add 2 custom entries, one for each port and
supply the IP address of the machine on the internal network
> running the PCAnywhere host.
>
> Assuming the internal IP is 192.168.0.10, it should look like this:
> http://www.ingineerix.com/wireless/pictures/?sec-portredir1
>
> -Phil
> ----- Original Message -----
> From: <wireless@peake.com>
> To: <karlnet@WISPNotes.com>
> Sent: Monday, July 15, 2002 12:44 PM
> Subject: [Karlnet] PCAnywhere
>
>
> > Runing KarlNet 4.02 5 user CPE, CPE has public IP, users have static
> > private IPs.
> >
> > Can I get PCAnyWhere to work so that the CPE can redirect to one of the
> > private IP?
> >
> > Chris
> > wireless@peake.com
> >
> > Find you next site at
> > www.cehconsulting.biz
> >
> > ---
> > [This E-mail scanned for viruses by Declude/F-Prot AV]
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
|