I'm curious -- why Network Address Translation Redirector and not just
Incoming NAT?
Travis
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Phil
Sent: Wednesday, July 17, 2002 11:16 AM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] PCAnywhere - HOWTO
Yes, map Ports 5631-TCP and 5632-UDP to the internal IP of the machine
you want to connect to.
To do this, turn on "Network Address Translation Redirector" in the
"General Setup" menu, then open the "Network Address Translation
Redirector Setup" menu and add 2 custom entries, one for each port and
supply the IP address of the machine on the internal network running the
PCAnywhere host.
Assuming the internal IP is 192.168.0.10, it should look like this:
http://www.ingineerix.com/wireless/pictures/?sec-portredir1
-Phil
----- Original Message -----
From: <wireless@peake.com>
To: <karlnet@WISPNotes.com>
Sent: Monday, July 15, 2002 12:44 PM
Subject: [Karlnet] PCAnywhere
> Runing KarlNet 4.02 5 user CPE, CPE has public IP, users have static
> private IPs.
>
> Can I get PCAnyWhere to work so that the CPE can redirect to one of
> the private IP?
>
> Chris
> wireless@peake.com
>
> Find you next site at
> www.cehconsulting.biz
>
> ---
> [This E-mail scanned for viruses by Declude/F-Prot AV]
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|