Actually I was thinking like this
PtMP = /30 for each radio, so you would add DIRECT routes for each
radio?
Or
PtMP = /24 = all RADIO'S go in the same subnet.
Dan Metcalf
Wireless Broadband Sytems
dan.metcalf@wbsysnet.com
www.wirelessbroadbandsystems.com
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Charles Chia Sheng Wu
> Sent: Friday, July 05, 2002 1:19 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] Drop in Throughput?
>
> is this what you mean?
>
> PtP link b/n 2 radios = /30
> base station ethernet ports @ a PoP = /29
> PtMP radios = /26
>
> however, we don't backhaul w/ 2.4, we end up building our pops as
follows
>
> cisco
> vlans
> AP - /26
>
> does this work
>
> -Charles
>
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com
[mailto:karlnet-admin@WISPNotes.com]On
> Behalf Of Dan Metcalf
> Sent: Friday, July 05, 2002 12:05 PM
> To: karlnet@WISPNotes.com
> Subject: RE: [Karlnet] Drop in Throughput?
>
>
> HUH?
>
> Do you I setup /30 routes for each radio or do I just put radio in 1
> subnet?
>
>
> Dan Metcalf
> Wireless Broadband Sytems
> dan.metcalf@wbsysnet.com
> www.wirelessbroadbandsystems.com
>
>
>
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
[mailto:karlnet-admin@WISPNotes.com]
> On
> > Behalf Of Charles Chia Sheng Wu
> > Sent: Friday, July 05, 2002 1:09 PM
> > To: karlnet@WISPNotes.com
> > Subject: RE: [Karlnet] Drop in Throughput?
> >
> > huh?
> >
> > -----Original Message-----
> > From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com]On
> > Behalf Of Dan Metcalf
> > Sent: Friday, July 05, 2002 11:57 AM
> > To: karlnet@WISPNotes.com
> > Subject: RE: [Karlnet] Drop in Throughput?
> >
> >
> > What is the better to configure routing with karlnet?
> >
> > Do you setup a direct route for say 192.168.1.0 / 255.255.255.0
> >
> > And put each radio in that network or
> >
> > Do you setup a DIRECT route for each radio say 192.168.1.0 /
> > 255.255.255.252?
> >
> >
> >
> > Dan Metcalf
> > Wireless Broadband Sytems
> > dan.metcalf@wbsysnet.com
> > www.wirelessbroadbandsystems.com
> >
> >
> >
> > > -----Original Message-----
> > > From: karlnet-admin@WISPNotes.com
> [mailto:karlnet-admin@WISPNotes.com]
> > On
> > > Behalf Of Charles Chia Sheng Wu
> > > Sent: Friday, July 05, 2002 12:43 PM
> > > To: karlnet@WISPNotes.com
> > > Subject: RE: [Karlnet] Drop in Throughput?
> > >
> > > >Bridging
> > >
> > > which is a big problem, b/c now multiple clients on all your
> > towers/POPs
> > > are
> > > all sharing the same broadcast domain
> > >
> > > on average, you'll double your latency, and 1/2 your throughput
for
> > each
> > > additional hop that you bridge
> > >
> > > not a problem for that first hop, but when we start talking 4+
hops,
> > > things
> > > can get hairy
> > >
> > > -Charles
> > >
> > > _______________________________________________
> > > Karlnet mailing list
> > > Karlnet@WISPNotes.com
> > > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > > ---
> > > [This E-mail scanned for viruses by Declude Virus]
> > >
> >
> >
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > ---
> > [This E-mail scanned for viruses by Declude Virus]
> >
>
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
---
[This E-mail scanned for viruses by Declude Virus]
|