Correct.. use this to connect skimmer and ONE internet cluster. Don't use
it for two clusters.
73, Gerry
On Mon, Nov 10, 2008 at 5:00 PM, David Robbins K1TTT <k1ttt@arrl.net> wrote:
> DANGER! DO NOT send the same outgoing spot to multiple nodes, this can
> result in your spots showing up multiple times around the world and get
> sysops annoyed at you.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
> > -----Original Message-----
> > From: cq-contest-bounces@contesting.com [mailto:cq-contest-
> > bounces@contesting.com] On Behalf Of Gerry Hull
> > Sent: Monday, November 10, 2008 21:40
> > To: CQ-Contest; Tom - N1MM; yccc@yccc.org
> > Subject: [CQ-Contest] ClusterJoin... Mix your Telnet Cluster Spots and
> > CWSkimmer spots into same application.
> >
> > http://www.w1ve.com/ClusterJoin.zip
> >
> > This is free software.
> >
> > What it is: It's a TCP Daemon that listens for connections on a port
> (23
> > is the default, Telnet) and connects to other servers, and mixes the
> > content.
> >
> > Once you've connected, you can then connect to as many telnet spot
> sources
> > as you would like.
> >
> > I dreamed this up as a way to connect CW Skimmer and an external cluster
> > to
> > N1MM at the same time.... Therefore, get the spots from Skimmer along
> > with
> > everything from the net.
> >
> >
> > Example:
> >
> > ------ K1TTT.NET (for example)
> > /
> > N1MM setup to connect to ClusterJoin (locahost)
> > \
> >
> > ------- CW SKIMMER on localhost:7300
> >
> >
> > There is no limit to the number of clients that can connect to
> > ClusterJoin,
> > as well as no limits on the number of clusters you can connect to.
> >
> > I think, perhaps, it's silly to connect more than one real-world cluster,
> > unless you want to...
> >
> > All traffic sent to ClusterJoin goes to all connected telnet sessions.
> > you must log in to each session.
> >
> > You'lll get instructions when you log in.
> >
> > ClusterJoin.exe is a 14Kb file, and is a Windows Console application.
> > Just leave it running and minimize.
> > It is a .Net application and requires the .Net Framework 2.0 be installed
> > on
> > your system. You can get that from Microsoft's site if you don't have
> it.
> >
> > No install -- just extract ClusterJoin.exe from the Zip file and go.
> >
> > I'm not on the CWSkimmer reflector, so some one please pass it on.
> >
> > Enjoy!
> >
> > 73, Gerrry W1VE
> > _______________________________________________
> > CQ-Contest mailing list
> > CQ-Contest@contesting.com
> > http://lists.contesting.com/mailman/listinfo/cq-contest
>
>
>
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|