Hi Val,
That's not exactly true in my power supply. Most of my transformers are
individual and I can switch power onto them individually.
For example, I could soft start HV, I can delay turn on of Screen, etc, because
there is separate primary power to each.
Paul.
> Date: Mon, 2 Oct 2023 21:21:28 +0300
> From: Val <val@vip.bg>
> To: amps@contesting.com
> Subject: Re: [Amps] step start
> Message-ID: <e24444e5-0559-cfd7-ad48-3c05909929ab@vip.bg>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Hello Paul,
>
> As you will put the step start circuit in the transformer primary, it
> will limit the transformer inrush current and thus all the voltages
> provided by the transformer - filament, screen, grid, plate.
>
> 73, Val LZ1VB
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|