Hi steve@nr4m.com:
You should think about the power supply has L1 and L2 as it's power
input.
If it is 120. Volts or
if it is 240. Volts it doesn't matter an appropriate THREE pin plug is
correct, *
there is no other wire or pin to consider, any method that makes it work
is fine.
Operating on 240. Volts is superior as it allows the use of thinner
wire and
a lesser current through plugs and switches. AWG 10. should not be
necessary.
_In the amplifier_ there is no neutral, only L1 and L2.
*
120 Volts =
| |
o
240 Volts =
- -
o
On 12/28/22 11:05 AM, Victor Rosenthal 4X6GP wrote:
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
Ron W4BIN - Understanding is much better than
knowing how.MX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|