* http://www.jamestowndistributors.com/userportal/show_product.do?pid=580
- Hose
* http://www.jamestowndistributors.com/userportal/show_product.do?pid=10376
- Hose flange
* http://www.jamestowndistributors.com/userportal/show_product.do?pid=589
- Tunnel blower
If you are intent on converting square to round for the hose, just about
anyone who does commercial air conditioning repair can have their "tin
knocker" make up the transition section.
73 Martin Flynn
W2RWJ
On 4/9/2013 5:14 PM, Rick Stealey wrote:
I need a means of converting the blower flange to a round hose, and the
compliment of that at the amplifier. I will run the 6 feet of hose through the
sheetrock wall, and down through the sole plate into the basement, so the
maximum hose diameter is 3.5 inches (it will go through a 2 X 4 sole plate).
Any ideas where to get parts I would need?
Rick K2XT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|