My AL-82 (3 months old) took the fuses out for the first time. Is there a fix
for this or... ?
73,
Gary...wa6fgi
----- Original Message -----
From: Mitch Cox
To: Gary McAdams ; amps@contesting.com
Sent: Sunday, November 14, 2010 5:50 AM
Subject: Re: [Amps] AL-82 Blowing fuses on startup
Sounds like the step-start relay is welded. That's where I would start.
----- Original Message -----
From: Gary McAdams
To: amps@contesting.com
Sent: Sunday, November 14, 2010 8:47 AM
Subject: [Amps] AL-82 Blowing fuses on startup
Hello Group.
Short question: I have an AL-82 that has started to blow a fuse on start-up.
It doesn't do it every time, and when the fuse is replaced the unit
starts OK and runs all day w/o problems. This all started when I
re-arranged the shack. The unit is about two years old.
The first time it happened, I checked the AC input at ~248 volts. Is
this too high?
So, any ideas on what to look for or where to start? As I sit here the
amp is on and running, but yesterday I had to replace a fuse to get it
started. This is only twice that I've had to replace the fuse, but
that's two times too many.
73 Gary WG7X
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1153 / Virus Database: 424/3254 - Release Date: 11/13/10
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|