Go away, you annoy me and are out of step with reality. Enjoy the Millens
while you are still able.
Carl
149 and counting......
----- Original Message -----
From: "k7rdx" <k7rdx@charter.net>
To: "Carl" <km1h@jeremy.mv.com>; <Amps@contesting.com>
Sent: Wednesday, January 13, 2010 4:47 PM
Subject: Re: [Amps] which HV connector to use?
> Well Carl,if you have really done all you have claimed to do i`m guessing
> you must be at least 148 yrs old...And have a shop as large as Yankee
> stadium too...I reported what works well for my building here,I`m not
> trying to change anyone`s opinion about building or what product to
> use...So you must be the perfect one!
> Jim..K7RDX..
> ----- Original Message -----
> From: "Carl" <km1h@jeremy.mv.com>
> To: "k7rdx" <k7rdx@charter.net>; <Amps@contesting.com>
> Sent: Wednesday, January 13, 2010 1:29 PM
> Subject: Re: [Amps] which HV connector to use?
>
>
>> Wooppie Doo
>>
>> Cemeteries are filled with perfect people.
>>
>> Carl
>> KM1H
>>
>>
>>
>>
>> ----- Original Message -----
>> From: "k7rdx" <k7rdx@charter.net>
>> To: "Phil Clements" <philc@texascellnet.com>; "'Carl'"
>> <km1h@jeremy.mv.com>;
>> <felipe@dxwatch.com>; <Amps@contesting.com>
>> Sent: Tuesday, January 12, 2010 10:10 PM
>> Subject: Re: [Amps] which HV connector to use?
>>
>>
>>> A.I have 6.4kk applied
>>> B. I keep moisture away from my equipment
>>> C.My mounting hole is as large as necessary to accomodate mounting
>>> D. I don`t gamble,I am a craftsman...If you ever see my work you will
>>> most
>>> likely agree.
>>> E.You should improve on your metal working..Good Luck!
>>> Jim..K7RDX..
>>> ----- Original Message -----
>>> From: "Phil Clements" <philc@texascellnet.com>
>>> To: "'k7rdx'" <k7rdx@charter.net>; "'Carl'" <km1h@jeremy.mv.com>;
>>> <felipe@dxwatch.com>; <Amps@contesting.com>
>>> Sent: Tuesday, January 12, 2010 7:02 PM
>>> Subject: Re: [Amps] which HV connector to use?
>>>
>>>
>>>>
>>>>
>>>>> I have used Millens since 1972 and have NEVER had that
>>>> happen...Jim..K7RDX..
>>>>
>>>> Reasons that you have not had a Millen connector arc:
>>>> A. You have not applied over 4-5 KV for an extended amount of time
>>>> B. You live in a very dry environment
>>>> C. Your mounting hole is much larger than the diameter of the
>>>> connector.
>>>> D. If none of the above applies to you, you are extremely lucky, and
>>>> should
>>>> purchase a power ball lottery ticket immediately!
>>>>
>>>> (((73)))
>>>> Phil, K5PC
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Amps mailing list
>>>> Amps@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.432 / Virus Database: 270.14.136/2616 - Release Date:
>>> 01/12/10 07:35:00
>>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.432 / Virus Database: 270.14.138/2618 - Release Date:
> 01/13/10 07:35:00
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|