ORIGINAL MESSAGE:
On Wed, 13 Jan 2010 03:55:50 EST, texasrf@aol.com wrote:
>
>I can't see a banana plug arrangement being any safer unless there is some
>type of locking device to prevent accidentally unplugging the cable.
REPLY:
The best approach is to use a connector ONLY at the power supply end of the HV
wire. The amplifier end should be hard-wired with no connector and a good strain
relief. That way, if the wire breaks off the connector, no HV is exposed.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|