Wooppie Doo
Cemeteries are filled with perfect people.
Carl
KM1H
----- Original Message -----
From: "k7rdx" <k7rdx@charter.net>
To: "Phil Clements" <philc@texascellnet.com>; "'Carl'" <km1h@jeremy.mv.com>;
<felipe@dxwatch.com>; <Amps@contesting.com>
Sent: Tuesday, January 12, 2010 10:10 PM
Subject: Re: [Amps] which HV connector to use?
> A.I have 6.4kk applied
> B. I keep moisture away from my equipment
> C.My mounting hole is as large as necessary to accomodate mounting
> D. I don`t gamble,I am a craftsman...If you ever see my work you will most
> likely agree.
> E.You should improve on your metal working..Good Luck!
> Jim..K7RDX..
> ----- Original Message -----
> From: "Phil Clements" <philc@texascellnet.com>
> To: "'k7rdx'" <k7rdx@charter.net>; "'Carl'" <km1h@jeremy.mv.com>;
> <felipe@dxwatch.com>; <Amps@contesting.com>
> Sent: Tuesday, January 12, 2010 7:02 PM
> Subject: Re: [Amps] which HV connector to use?
>
>
>>
>>
>>> I have used Millens since 1972 and have NEVER had that
>> happen...Jim..K7RDX..
>>
>> Reasons that you have not had a Millen connector arc:
>> A. You have not applied over 4-5 KV for an extended amount of time
>> B. You live in a very dry environment
>> C. Your mounting hole is much larger than the diameter of the connector.
>> D. If none of the above applies to you, you are extremely lucky, and
>> should
>> purchase a power ball lottery ticket immediately!
>>
>> (((73)))
>> Phil, K5PC
>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.432 / Virus Database: 270.14.136/2616 - Release Date:
> 01/12/10 07:35:00
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|