Amps
[Top] [All Lists]

Re: [Amps] current in primary of microwave oven transformer

To: amps@contesting.com
Subject: Re: [Amps] current in primary of microwave oven transformer
From: David Ackrill <dave.g0dja@tiscali.co.uk>
Date: Thu, 24 Apr 2008 15:46:31 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
d.cutter@ntlworld.com wrote:
> David
> 
> I don't think that's what Angel measured:  I understood it was measured using 
> a regular current meter, therefore the results are VA reactive not Watts.

I must have missed that bit, or forgot.

Yes, a current reading will give you VA if you don't have the phase 
angle information.

But, that's not what the domestic electric meter will be measuring of 
course, so the only charge will be in terms of the kW consumed over the 
period of time that the transformer is switched on for.

Dave (G0DJA)
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>