[Amps] KNOB ORIENTATION

To:	<amps@contesting.com>
Subject:	[Amps] KNOB ORIENTATION
From:	vic at rakefet.com (Vic Rosenthal)
Date:	Tue Feb 25 13:06:06 2003

W0YR@aol.com wrote:
> 
> Further, I'd
> like to have some suggestions as to knob size and the recommended number of
> set screws...and...this is important....whether they should have slotted
> screw heads or heads requiring an Allen wrench.

Everyone knows that slotted screws are at least 11db worse from an IMD
standpoint.

Vic K2VCO

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] KNOB ORIENTATION, W0YR@aol.com [Amps] KNOB ORIENTATION, Guillermo [Amps] KNOB ORIENTATION, Phil Clements [Amps] KNOB ORIENTATION, Steve Katz [Amps] KNOB ORIENTATION, wb8jkr@juno.com [Amps] KNOB ORIENTATION, W0YR@aol.com [Amps] KNOB ORIENTATION, Vic Rosenthal <= [Amps] KNOB ORIENTATION, carl seyersdahl [Amps] KNOB ORIENTATION, carl seyersdahl [Amps] KNOB ORIENTATION, Steve Katz [Amps] KNOB ORIENTATION, Steve Katz [Amps] KNOB ORIENTATION, carl seyersdahl [Amps] KNOB ORIENTATION, carl seyersdahl [Amps] KNOB ORIENTATION, Radio WC6W [Amps] KNOB ORIENTATION, Wt8r@aol.com [Amps] KNOB ORIENTATION, W0YR@aol.com [Amps] KNOB ORIENTATION, carl seyersdahl

Previous by Date:	[Amps] KNOB ORIENTATION, Steve Katz
Next by Date:	[Amps] LED products, Ragnar Otterstad
Previous by Thread:	[Amps] KNOB ORIENTATION, W0YR@aol.com
Next by Thread:	[Amps] KNOB ORIENTATION, carl seyersdahl
Indexes:	[Date] [Thread] [Top] [All Lists]