>
>> Nothing complicated needed to see this - just use an ordinary power/SWR
>> meter and turn the power down on the ICOM. Watch the meter when you key
>> the rig.
>>
>> Paul
>
>Hi Paul,
>
>No way. You only see a tiny bit of the actual spike.
>
>You can not see the peak power that way, even with many peak
>reading meters.
>
>It takes a fast meter with a long storage time or a storage scope
>(or one with long persistence and high intensity and horizontal
>sweep off) to see the real peak.
>
one can see the peak with delayed sweep oscilloscopes.
end
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|