> It would seem to me that the IC-706 (and rigs like it) would mainly be
> problematic with amps that require substantially less than 100w to drive
> and that switch quickly. Is this correct? 73, Doug, K4DSP
That's a lot less than I measure here Doug, using a peak storage
power meter used for reading medical devices.
With 13.8 volts I read an overshoot to 140 watts on my newer 706
MKII and 148 watts on the old non-Mark one.
73, Tom W8JI
w8ji@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|