I will add that my termination resistance adjustment did work well. It would
show significant changes in the depth of nulls.
Cecil
Sent from my iPad
> On Jan 2, 2022, at 9:29 AM, Pete Smith N4ZR <pete.n4zr@gmail.com> wrote:
>
> I recently installed a K9AY loop (with the Array Solutions controller), and
> have a couple of questions. Installation is pretty standard, with a
> fiberglass pole at the center, ground rod at its base, and on the ground
> radials under each direction of the loop.
>
> The antenna is directional, as demonstrated by tuning in broadcast stations
> at the high end of the AM band and separating stations on the same frequency
> so that I can hear one or the other. Atmospheric noise is 1-2 S units more
> on my inverted L than on the K9AY antenna, but signal strengths of stations
> in the favored direction of the loop seem about the same or a bit lower than
> the inverted L. The Termination adjustment is working, to judge by the
> switching transients, but seems to make little or no difference.
>
> How do these results compare with others' experience? I didn't expect a
> "magic bullet", but the K9AY loop seems a little bit underwhelming.
>
> --
> 73, Pete N4ZR
> Check out the new Reverse Beacon Network
> web server at<http://beta.reversebeacon.net>.
> For spots, please use your favorite
> "retail" DX cluster.
> _________________
> Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|