The open frame relays are suitable for that purpose, there no need at all
for coaxial relays
73
Peter
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Drax Felton
Sent: Donnerstag, 17. April 2014 21:49
To: qrv@kd4e.com
Cc: amps@contesting.com
Subject: Re: [Amps] Is this relay suitable for 1kw+ RF?
Nope. You need something like this:
http://www.rfparts.com/relays/relays-coaxrelays/6350-6.html
On Thu, Apr 17, 2014 at 3:04 PM, qrv@kd4e.com <qrv@kd4e.com> wrote:
> I recently acquired one of these 3PDT relays:
>
> http://www.ebay.com/itm/Leach-Relay-Model-1177-CBF-115-Volt-
> 50-60-Cycles-Coil-374-New-Old-Stock-/121209541061
>
> I have an application to cold-switch sections of coil inline with
> my 43' ZeroFive vertical to help with tuning on 160 + 80m.
>
> Anyone know if this relay would be suitable to the task at full
> legal ... or for that matter for RF in that application at all?
>
> Thanks ... David KD4E
>
>
>
> --
>
> David (NOT Dave) Colburn, KD4E - Nevils, Georgia USA
>
> Safe & Secure Search Engine: duckduckgo.com
>
> Android for Hams: groups.yahoo.com/group/hamdroid
> Creative Tech: groups.yahoo.com/group/ham-macguyver
> Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
>
> Restored to design-spec at Heaven's gate 1Cor15:22
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|