[Skimmertalk] Two SkimServs problem

[Marco HB9CAT]

Thanks all for you replies,

telnet is not the issue, both telnet sessions from the Aggregator are up.
I triple checked the configuration files, found a minor glitch but that
didn't fix it; I've now cut the configurations to a minimum to have better
visibility, I provide them below.
Again: both servers work if launched alone,  both are starting correctly (no
error), decoders count goes up nicely; but the 2nd launched server does not
send spots.

Skimmer Commands do reach the servers (0=SkimSrv, 8=RttySkimSrv):
0SETT: vlNormal 7000.0-7040.0,14000.0-14070.0
8SETT: vlNormal 7040.0-7060.0,14070.0-14100.0

Are there any parameters to turn on debugging ?

Marco HB9CAT

------------------------------
Configs below:
---------------------------SkimSrv.ini----------------------------------- 
[Window]
MainFormLeft=1206
MainFormTop=201

[User]
Call=HB9H
Name=Art
QTH=Switzerland
Square=JN46la

[Telnet]
Port=7300
PasswordRequired=0
Password=
CqOnly=0
AllowAnn=1
AnnUserOnly=0
AnnUser=
MinQuality=1

[Skimmer]
CenterFreqs192=3591000,7091000,10191000,14091000
SegmentSel192=0101
CwSegments=3500000-3570000,7000000-7040000,10100000-10140000,14000000-140700
00

ThreadCount=2
DeviceName=01 CWSL_Tee on ELAD DUO 1.0
Rate=2
FreqCalibration=1

----------------------------------RttySkimSrv.ini---------------------------
--
[User]
Call=HB9H
Name=Art
QTH=Switzerland
Square=JN46la

[SDR]
;use SKIMMER/SDR Telnet command to list available device names
DeviceName=01 CWSL_Tee on ELAD DUO 1.0
;DeviceName=02 ELAD DUO 1.0
;0=40kHz 1=96kHz 2=192kHz
Rate=2
FreqCalibration=1

[Telnet]
Port=7350
PasswordRequired=0
Password=
CqOnly=0
AllowAnn=1
AnnUserOnly=0
AnnUser=
;0=minimal 1=normal 2=aggressive 3=paranoid
ValidationLevel=1

[Skimmer]
;must be one of the contests defined in Contests.ini
Contest=DX
CenterFreqs192=3591000,7091000,10191000,14091000
SegmentSel192=0101
RttySegments=3570000-3600000,7040000-7060000,10140000-10150000,14070000-1410
0000







-----------------------Rtty
-----Original Message-----
From: Skimmertalk [mailto:skimmertalk-bounces at contesting.com] On Behalf Of
Marco HB9CAT
Sent: martedì, 22. dicembre 2015 17:41
To: skimmertalk at contesting.com
Subject: [Skimmertalk] Two SkimServs problem

Hi,

 

I'm experimenting running SkimServ and RttySkimSrv concurrently on the same
receiver as described here:
http://www.reversebeacon.net/downloads/aggregator/Running-RTTYSkimServer-and
-CW-SkimServer.pdf

 

Receiver is an Elad FDM-DUO, so I'm covering 2 Bands at the same time.

 

Both servers start fine, the amount of decoders looks right on both servers.
The weird thing is:

-          If I start SkimSrv first, RttySkimSrv is not sending any Spots

-          If I start RttySkimSrv first, SkimSrv is not sending any Spots

 

As I tested initially, everything was working fine (spots from both), so the
problem must be related to the configuration files.

 

Did anyone experience this ?

 

Marco HB9CAT

 

 

_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk