Hi Barry and Mark thanks for the info - I think the internal L/S is disabled
when the external L/S is plugged in, the same with headphones - but Ill
check those suggestions again.
Just thinking about it I have my headphones connected to the back exp L/S
via an external DSB audio filter so that may be the problem.
Thanks Dave
----- Original Message -----
From: "Barry N1EU" <barry.n1eu@gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Wednesday, November 09, 2011 9:28 AM
Subject: Re: [TenTec] Orion 2 query L/S on 2nd receiver.
On Wed, Nov 9, 2011 at 9:18 AM, Dave G3RXP <g3rxp@btinternet.com> wrote:
I would like to monitor the 2nd RX by loudspeaker and use the headphones
for the main RX and wondered what is the best method to do this. I could
use the line output socket at the back but I may have missed an easy
option?
Why not use the EXT SPKR output on the rear panel (or just the Orion's
internal speaker) with Audio configured as Left/Right=Main and
Spkr=Sub?
Barry N1EU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|