I use DeoxIT part number D100L-25C. Its a dropper bottle with a fine
capilary out the cap. I think its enough to last a lifetime of full time
servicing because a connector or switch contact really only needs about
a quarter drop of the stuff. I don't like the spray stuff soaking up
insulation around switch contacts.
73, Jerry, K0CQ
On 1/1/2011 8:53 PM, Joe Roberts wrote:
>
>>
>> I'd love to but can't figure it out. Not being in the US, I have to
>> get it from an eBay store. There are several that sell Deoxit
>> products, but none that are very clear which one they sell is the one
>> I need.
>>
>
>
> I had best results with DeOxit D100L in a small bottle (7.4) with a
> brush applicator.
>
> Here's a pic from one retailer:
>
> http://www.parts-express.com/pe/showdetl.cfm?Partnumber=341-215
>
> Sometimes I use a tiny paintbrush or a toothpick to apply the stuff.
> I've used this bottle a lot and it looks like almost none is missing.
> The smallest quantity is enough to do the job. 7.4ml will last me
> probably 5 years or more, doing a few radios a year.
>
> The spray can puts out way too much for precision work but you can spray
> a little bit into a cup and work with it that way.
>
> I don't know if there is any exact replacement for DeOxit. It is magic
> potion. Worth every penny.
>
> Joe N5KAT
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|