The N4PY software controls the Jupiter with the front panel on.
Logging and contest software will also control the Jupiter.
I think MixW logging and contest software will control the Jupiter.
http://www.mixw.net/
Jim W7ANF
----- Original Message -----
From: "Scott Johnson" <scott@wowpage.com>
To: <tentec@contesting.com>
Sent: Wednesday, October 09, 2002 9:48 AM
Subject: [TenTec] Jupiter software
> OK, here's a question I can't seem to find the answer to anywhere. The
> Jupiter programmer's guide says that there are two modes for controlling
the
> radio.
>
> Pegasus emulation mode makes the Jupiter look like a Pegasus -- it uses
the
> Pegasus command set and DISABLES the front panel, while Jupiter mode uses
a
> separate Jupiter command set and DOES NOT DISABLE the front panel.
>
> Several people have written control software that takes advantage of
Pegasus
> mode. Is there no oftware that uses Jupiter mode, so that I can retain
> front panel control and display? If I wanted my front panel disabled, I
> would have bought a Pegasus and saved $300. :)
>
> I tried the Jupiter-specific version of PegasusPlus, but it too puts the
> radio in Pegasus mode.
>
> Anyone know about something I missed? Any ideas appreciated.
>
> Scott
|