I already HAVE two rigs. The other is an IC-756PRO. :)
Scott
--
Scott Johnson (scott@wowpage.com) (s.johnson@klotzdigital.com)
ICQ: 30730876 ICBM: N33 45 50.6 W84 49 31.3 (+- 3dB)
> -----Original Message-----
> From: n4lq@iglou.com [mailto:n4lq@iglou.com]
> Sent: Wednesday, October 09, 2002 1:49 PM
> To: Scott Johnson; tentec@contesting.com
> Subject: Re: [TenTec] Jupiter software
>
>
> Yea but if you had saved $300 and bought a Pegasus then you couldn't have
> run the Pegasus in Jupiter mode either and then where would you be? Of
> course, you could have taken the $300 and bought a Triton IV which
> requires no software and have 2 rigs....
>
> -----Original Message-----
> From: "Scott Johnson" <scott@wowpage.com>
> To: <tentec@contesting.com>
To: <tentec@contesting.com>
> Date: Wed, 9 Oct 2002 12:48:34 -0400
> Subject: [TenTec] Jupiter software
>
> > OK, here's a question I can't seem to find the answer to anywhere. The
> > Jupiter programmer's guide says that there are two modes for
> > controlling the
> > radio.
> >
> > Pegasus emulation mode makes the Jupiter look like a Pegasus -- it uses
> > the
> > Pegasus command set and DISABLES the front panel, while Jupiter mode
> > uses a
> > separate Jupiter command set and DOES NOT DISABLE the front panel.
> >
> > Several people have written control software that takes advantage of
> > Pegasus
> > mode. Is there no oftware that uses Jupiter mode, so that I can retain
> > front panel control and display? If I wanted my front panel disabled,
> > I
> > would have bought a Pegasus and saved $300. :)
> >
> > I tried the Jupiter-specific version of PegasusPlus, but it too puts
> > the
> > radio in Pegasus mode.
> >
> > Anyone know about something I missed? Any ideas appreciated.
> >
> > Scott
> >
> > --
> > Scott Johnson (scott@wowpage.com) (s.johnson@klotzdigital.com)
> > ICQ: 30730876 ICBM: N33 45 50.6 W84 49 31.3 (+- 3dB)
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
|