Yaesu
[Top] [All Lists]

Re: [Yaesu] FT1000D with a Problem

To: "'Bob Maser'" <bmaser@tampabay.rr.com>, "'Bill Gillenwater'" <gillie@pa.net>, "'Yaesu Reflector'" <yaesu@contesting.com>
Subject: Re: [Yaesu] FT1000D with a Problem
From: "Robin Thompson" <robin@g3tkf.co.uk>
Reply-to: robin@g3tkf.co.uk
Date: Sun, 31 Aug 2008 09:37:30 +0100
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
That's an odd one Bill ...
Don't suppose its something simple like the squelch control turned on
slightly ?
Easily done...
If not - what happens if you are BK in CW ? and does it do the same thing
using VOX ?

73
Robin
G3TKF
City of Bath

> -----Original Message-----
> From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com]
> On Behalf Of Bob Maser
> Sent: 20 August 2008 18:53
> To: Bill Gillenwater; Yaesu Reflector
> Subject: Re: [Yaesu] FT1000D with a Problem
> 
> No, because it works fine when the amp is on line. And also all of the
audio
> is muted, not even background noise is getting through.  I am not using an
> amp interface because according to Yaesu it can handle the load put out by
> the Henry, which is about 160ma @ 24VDC.
> 
> Bob W6TR
> ----- Original Message -----
> From: "Bill Gillenwater" <gillie@pa.net>
> To: "Bob Maser" <bmaser@tampabay.rr.com>; "Yaesu Reflector"
> <yaesu@contesting.com>
> Sent: Wednesday, August 20, 2008 1:42 PM
> Subject: Re: [Yaesu] FT1000D with a Problem
> 
> 
> > Bob, sounds like it might be a dirty relay in the amp.
> >
> > 73 Bill K3SV
> >
> > ----- Original Message -----
> > From: "Bob Maser" <bmaser@tampabay.rr.com>
> > To: "Yaesu Reflector" <yaesu@contesting.com>
> > Sent: Wednesday, August 20, 2008 11:19 AM
> > Subject: [Yaesu] FT1000D with a Problem
> >
> >
> >> Hi gang, I am new to this reflector and, since I own a few Yaesu
radios,
> >> I
> >> thought it would be wise to join your group.
> >>
> >> I have a problem with my FT1000D.  I use it mainly on SSB and always
PTT.
> >> When running the radio barefoot, after making a transmission, the
> >> receiver
> >> does not "unmute" right away.  I can see that the rest of the receiver
is
> >> working because I see the responding station on my S Meter but no audio
> > for
> >> a few seconds.  The longer I have been transmitting the longer it takes
> > for
> >> the audio to come back, and when it does come back, it comes on
> >> instantly.
> >> The strange thing is, when I have the amp on line (Henry 4K Ultra) I
> >> don't
> >> have the problem.
> >>
> >> Any suggestions?
> >>
> >> Tnx,
> >> Bob Maser  W6TR
> >>
> >> _______________________________________________
> >> Yaesu mailing list
> >> Yaesu@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/yaesu
> 
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu


_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>