Do you use the ALC line to control FT-1000 output level? It sounds like
it's not properly terminated when the amp is removed.
Dave
WA0ZZG
> Send Yaesu mailing list submissions to
> yaesu@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/yaesu
> or, via email, send a message with subject or body 'help' to
> yaesu-request@contesting.com
>
> You can reach the person managing the list at
> yaesu-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Yaesu digest..."
>
>
> Today's Topics:
>
> 1. Re: FT1000D with a Problem (Bill Gillenwater)
> 2. Re: FT1000D with a Problem (Bob Maser)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 20 Aug 2008 13:42:29 -0400
> From: "Bill Gillenwater" <gillie@pa.net>
> Subject: Re: [Yaesu] FT1000D with a Problem
> To: "Bob Maser" <bmaser@tampabay.rr.com>, "Yaesu Reflector"
> <yaesu@contesting.com>
> Message-ID: <001a01c902ec$1eea9fc0$6401a8c0@hsd1.pa.comcast.net>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Bob, sounds like it might be a dirty relay in the amp.
>
> 73 Bill K3SV
>
> ----- Original Message -----
> From: "Bob Maser" <bmaser@tampabay.rr.com>
> To: "Yaesu Reflector" <yaesu@contesting.com>
> Sent: Wednesday, August 20, 2008 11:19 AM
> Subject: [Yaesu] FT1000D with a Problem
>
>
>> Hi gang, I am new to this reflector and, since I own a few Yaesu radios,
>> I
>> thought it would be wise to join your group.
>>
>> I have a problem with my FT1000D. I use it mainly on SSB and always
>> PTT.
>> When running the radio barefoot, after making a transmission, the
>> receiver
>> does not "unmute" right away. I can see that the rest of the receiver
>> is
>> working because I see the responding station on my S Meter but no audio
> for
>> a few seconds. The longer I have been transmitting the longer it takes
> for
>> the audio to come back, and when it does come back, it comes on
>> instantly.
>> The strange thing is, when I have the amp on line (Henry 4K Ultra) I
>> don't
>> have the problem.
>>
>> Any suggestions?
>>
>> Tnx,
>> Bob Maser W6TR
>>
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 20 Aug 2008 13:52:55 -0400
> From: "Bob Maser" <bmaser@tampabay.rr.com>
> Subject: Re: [Yaesu] FT1000D with a Problem
> To: "Bill Gillenwater" <gillie@pa.net>, "Yaesu Reflector"
> <yaesu@contesting.com>
> Message-ID: <041801c902ed$93b16130$0200a8c0@Main>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> No, because it works fine when the amp is on line. And also all of the
> audio
> is muted, not even background noise is getting through. I am not using an
> amp interface because according to Yaesu it can handle the load put out by
> the Henry, which is about 160ma @ 24VDC.
>
> Bob W6TR
> ----- Original Message -----
> From: "Bill Gillenwater" <gillie@pa.net>
> To: "Bob Maser" <bmaser@tampabay.rr.com>; "Yaesu Reflector"
> <yaesu@contesting.com>
> Sent: Wednesday, August 20, 2008 1:42 PM
> Subject: Re: [Yaesu] FT1000D with a Problem
>
>
>> Bob, sounds like it might be a dirty relay in the amp.
>>
>> 73 Bill K3SV
>>
>> ----- Original Message -----
>> From: "Bob Maser" <bmaser@tampabay.rr.com>
>> To: "Yaesu Reflector" <yaesu@contesting.com>
>> Sent: Wednesday, August 20, 2008 11:19 AM
>> Subject: [Yaesu] FT1000D with a Problem
>>
>>
>>> Hi gang, I am new to this reflector and, since I own a few Yaesu
>>> radios,
>>> I
>>> thought it would be wise to join your group.
>>>
>>> I have a problem with my FT1000D. I use it mainly on SSB and always
>>> PTT.
>>> When running the radio barefoot, after making a transmission, the
>>> receiver
>>> does not "unmute" right away. I can see that the rest of the receiver
>>> is
>>> working because I see the responding station on my S Meter but no audio
>> for
>>> a few seconds. The longer I have been transmitting the longer it takes
>> for
>>> the audio to come back, and when it does come back, it comes on
>>> instantly.
>>> The strange thing is, when I have the amp on line (Henry 4K Ultra) I
>>> don't
>>> have the problem.
>>>
>>> Any suggestions?
>>>
>>> Tnx,
>>> Bob Maser W6TR
>>>
>>> _______________________________________________
>>> Yaesu mailing list
>>> Yaesu@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
>
> ------------------------------
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
> End of Yaesu Digest, Vol 68, Issue 9
> ************************************
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|