I have not tested that but the monitor tx audio seems to sound the same between
both sidebands..
-----Original Message-----
From: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] On
Behalf Of GGLL
Sent: Sunday, August 17, 2008 2:46 PM
To: yaesu@contesting.com
Subject: Re: [Yaesu] FT-1000 Alignment Question - SHIFT Control Center
Do you get similar reports on your transmission?.
Regards
Guillermo - LU8EYW.
Rich Hallman - N7TR escribió:
> I noticed on one of my FT-1000's that the audio tone difference between
> USB and LSB is quite noticeable. To get the tone correct I need to turn
> the SHIFT control from center to almost 3 o'clock for one side...then 9
> o'clock for the other sideband.
>
>
>
> I have the alignment manual, but wanted to know what alignment would
> potentially fix this issue.
>
>
>
> Thanks...
>
> Rich
>
>
>
> Rich N7TR
>
> ex KI3V, N3AMK, WB3JOV
>
> www.n7tr.com
>
> Telnet: dxc.n7tr.com N7TR DXCluster
>
>
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|