WriteLog
[Top] [All Lists]

Re: [WriteLog] v12.35c commport question

To: writelog@contesting.com
Subject: Re: [WriteLog] v12.35c commport question
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Wed, 2 Jan 2019 18:08:32 -0500
List-post: <mailto:writelog@contesting.com>

Have you checked the example configuration file for MK and Writelog
(in Router -> Help | Download Documents or on-line in the MK area
at www.microHAM-USA.com/Support.html)?

*DO NOT* attempt to use the same port for the radio and CW (K1EL
Winkey).  Also confirm that "COM PTT" for all Ports is set to NO.

73,

   ... Joe, W4TV


On 2019-01-01 12:12 PM, Jim wrote:
My Setup:  Writelog 12.35c and MicroHAM, Microkeyer

Have Comm10 identified and working for CW K1EL Keyer in uRouter. I was able to send CW from uRouter.

In Writelog 12.35c, I selected PORTS and set Comm10 for CW and then identify K1EL Winkey as the CW Keying Interface.  When I tap APPLY and then OK I am getting a "Can't open port for Winkey" error.   This implies that something else is using Comm10, but I am not aware of anything that is using Comm10.  So I shutdown to power off with the computer thinking that this would release Comm10--no luck!

BTW this configuration with Comm10, uRouter and Writelog v11.29 worked.

Any help here?

Jim/KC4HW



_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>