I just saw Radio 2 MMTTY RX window was silent when I toggle between RAdio
1 and 2.
I followed the Writelog setup.
So something must be totally wrong????
73 LB3RE
Den tir, mai 20, 2014, 15:37 skrev Joe Subich, W4TV:
>
> The example configuration is full of screen shots.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2014-05-20 9:24 AM, LB3RE LJ3RE Stein-Roar Brobakken wrote:
>> If anyone can do printscreen of SO2r RTTY settings for MK2R+ in writelog
>> and urouter soundcard + mmtty I had been very happy I was little
>> confused by trying get it work too
>>
>> ---Sent by iphoneLB3RE LJ3RE K3RAG ex: LA6FJAwww.lb3re.com ~ Rag ~ Stein
>> Roar Brobakken e-mail:post@lb3re.com
>>
>> On 20. mai 2014 13:10:19 CEST, Richard Thorne <rthorne@rthorne.net>
>> wrote: Group, Thanks to Dean, Joe and Steve (GW4BLE) I
>> determined that I had to go into the windows sound system and select the
>> 2 channel option as described below. Both instances of MMTTY are now
>> receiving the proper signal and demodulating correctly. Now on to the
>> transmit issue which I'll tackle this evening. I have a sneaking
>> suspicion that it has to do with the way I have my com ports setup.
>> I'll report back when I get it resolved. After I get all of this
>> working, I'll look at installing OCX Thanks Rich - N5ZC On
>> 5/19/2014 8:49 AM, Dean St. Hill wrote: Rich Welcome to the
>> twilight zone. Been there. Many times. To see the way the sound
>> cards are set-up within your system - click on the Audio-switching tab
>> of MK2R+. then click on "soundcard" - over on the right 2/3 down the
>> window. Even though the MMTTY plugin works, I would suggest that it
>> might be a good idea to actually use t
> he "OCX" set-up guideline as this is a more modern driver with the
> possibility of also using "2tone" as an alternative to MMTTY. if
> you're setting audio from the left channel in both windows - 1st make sure
> the buttons on MK2R+ are set correctly. That's the top right section of
> MK2R. If that is correct then you need to go to windows sound system -
> right click on the "speaker logo" in the system tray. Choose recording
> devices. in the recording devices double-click the USB codec. Then choose
> "advanced" tab - extreme right top of the new window. You will then see a
> drop-down with "default format" - this is where you need to choose a
> stereo option. Your current default is probably a mono option. I
> choose 2 channel, 16 bit 44100Hz (CD Quality) and this has always worked
> for me but I am almost sure it can be a much much lower quality - others
> with more expertise may jump in and help with guidance here. Finally
> after clicking the necessary "OK" etc. return to the two MMTTY wind
> ows and just confirm that left channel has been set up for your radio 1
> and right channel for your radio 2. Hmmm... you may also want to go
> back to router as well and under audio switching tab re-confirm that the
> "use line out channel" has also been set for radio one and radio 2. both
> may be set as "left". you should now be good to go as far as dual
> receive. let's get that going and then check the tx side of the
> equation. 73 and best regards, Dean - 8P6SH On
> Mon, May 19, 2014 at 7:37 AM, Richard Thorne <rthorne@rthorne.net>
> wrote:This is a cross post to Writelog and Microham. I've been working on
> configuring an MK2R+ SO2R controller with a pair of K3's and my Win 7 Pro
> computer. I've been able to get SSB and CW to work properly. I'm hung up
> on RTTY using MMTTY. I've downloaded the setup guide from Microham and
> have setup two directories and two instances of MMTTY, I also have the
> MMTTY plug in for Writelog installed. If I select the test butt
> on for FSK on the MK2R+ ports tab for rig 1 I get diddling same goes for
> rig 2. While in Writelog I've followed the setup instructions by first
> selecting rig 1 and starting MMTTY from the appropriate directory, same
> for rig 2. However, I can't get either to diddle. In addition, both
> instances of MMTTY appear to be getting the same audio from rig 1 from the
> phone jack. I've selected the right and left audio source on the misc tab
> while in TNC setup. On the sound card tab in TNC setup I've selected
> Reception: Microphone (3 - USB Audio CODEC) and Transmission: Speakers (3
> - USB Audio CODEC) How does one determine which device identifier to
> select on the misc tab in tnc setup? I thought it would be 3 but I'm
> obviously incorrect. I want to to use the line out on the rear of the
> K3's to grab the audio since it's fixed and won't be affected by the
> volume control of either K3. The frustrating part is that I had this
> MK2R+ working just fine on RTTY with one K3, adding the 2nd K3 has
> been a challenge. Is there an updated setup guide specifically for Win 7?
> I'm half tempted to dust off an XP Pro laptop and give that a try, Win 7
> makes things very challenging. Thanks in advance for any assistance.
> Rich - N5ZC _______________________________________________ WriteLog
> mailing list WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the web:
> http://www.writelog.com/ -- Dean St.Hill Counterpoint
> Consulting 17 Ocean City St.Philip Barbados 246-266-8230
> 246-416-5277 dmsthill@gmail.com __._,_.___ Posted
> by: Richard Thorne <rthorne@rthorne.net> Reply via web post •
> Reply to sender • Reply to group • Start a New Topic •
> Messages in this topic (1) This list is for the exchange of
> information about the use and operation of microHAM products. Anyone
> with specific hardware support issues should contact microHAM support at
> mailto:suppor
> t@microHAM.com. Visit Your Group New Members 3 • Privacy
> • Unsubscribe • Terms of Use . __,_._,___
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|