Just a thought, Darren.
Does your laptop accept any plug-in cards? (e.g. PCMCIA?) If so, you could
purchase one inexpensively online. These give you one or more "native" serial
ports.
73, Mark
On Apr 1, 2013, at 10:47 AM, "Darren Collins (G0TSM)" <daz@g0tsm.com> wrote:
> Hi all,
> I have a G4ZLP digimaster pro+ which is basically an opto-isolator driven
> from an FTDI USB serial port. In CW it randomly goes mad sending all sorts of
> rubbish/garbage. It's not RF as i'm only keying the side tone, it's not the
> interface as it works fine with Logger32, SD and N1MM, but I'm hoping there
> is a simple line to add into the writelog.ini file to make it behave itself?
> This has actually been bugging me for a couple of years and until now I have
> worked around this by using an old Winkey on the laptop's comport. But I've
> now changed the 'holiday laptop' to a newer one and it doesnt have a com
> port. I was hoping that the erratic behaviour was machine specific but its
> still the same on the newer laptop. If I can't solve this I'll have to go
> down the separate USB serial port route as I'm really reluctant to buy
> another winkey USB. In these times of extortionate excess baggage charges
> every LB/1/2 KG helps and the fewer cables/interfaces I need to pack the
> better it is.
>
> Any advice would be appreciated.
>
> 73 Darren G0TSM
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|