----- Original Message -----
From: "Grant Kesselring" <kesselg@us.ibm.com>
To: <writelog@contesting.com>
Sent: Friday, November 10, 2006 5:39 AM
Subject: [WriteLog] SO2R DVK: MIC audio routing not obeying
Transmit Focus
> This leads me to believe that even when using my mic (not
> playing function
> key messages) that the sound card should put audio out
> over the correct
> channels (left or right) depending on transmit focus
> within WL.
You are correct. Mic audio should go to the active radio.
Right-click the speaker icon in the system tray. Left-click
"open volume control." You should be able to see the balance
slider on the master volume playback control shift
left/right, depending on which radio is active. If the
slider is sliding, you probably have a cabling/connector
problem. Also, make sure you click WL/tools/soundboard
options/echo microphone.
Dave Hachadorian, K6LL
Yuma, AZ
.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|