> However, in the MMTTY Plug-in, there is no PTT port selection on the TX
> tab. Instead, PTT (and FSK) are controlled by the Port menu selection in
the
> Rttyrite window. Of course, you don't need FSK is you are running AFSK,
> but PTT should still be controlled by the COM port selection under the
Port
> menu in the Rttyrite window.
>
> I think I'm right. I control PTT through radio control, but I can test it
with
> my PTT interface which I still have but no longer use if anyone needs to
me to.
>
> 73, Don AA5AU
Don's correct. PTT [interface RTS] is controlled via the Port selection in
the Rttyrite window - Nothing available to select in the MMTTY Setup as
accessed from the engine RTTY Control Panel.
|