Ran into a similar problem with my Icom 756 Pro running through the
Rigblaster Plus. Found the following notes on page 5 of the Rigblaster Plus
owners manual:
"In the AUTO mode your mic. is connected by default and it will work normally
with your radio's vox. In the RIGblaster's VOX mode your mic is disconnected
and your computer audio is hooked up. Therefore, your computer audio will be
able to activate your rig's vox circuit."
What the book doesn't explicitly say is that with RIGblaster VOX enabled your
rig's mike is DOA unless you switch it back to AUTO! Seems kind of dumb to
me.
Gary KC9UM
|