Jon,
In my previous test I never tried actually to log contact.You are
right!Logged frequency is the same as on the radio no mater what the
log-window readout is.That doesn't bother me either.
So many thanks for help Jon and I am sure to work you in CQWWRJ as so/1r/2tu
73, David S51MM
----- Original Message -----
From: "Jon Harder" <jon@praxisworks.org>
To: "David Fister" <dfister@siol.net>; "Writelog reflector"
<writelog@contesting.com>
Sent: Sunday, September 16, 2001 9:23 PM
Subject: Re: [WriteLog] 2 rttyrite windows
> David, I do know what you're saying. And when I first tried it out I
> thought it meant that one radio in two entry windows didn't work. But
even
> in S&P both windows _ will_ actually be logging the exact frequency. To
> me that's really the main point -- an accurate log. And it's great to
jump
> from MMTTY over to the ST-8000 when the copy is better, and then back and
> forth as needed. Worth the small visual inconvenience.
>
> Yes, the little entry window freq readout lags, but over several contests
> I've learned to just ignore the freq pushbutton and get on with working
'em
> . No need to reselect the radio port. .
>
> This takes a little getting used to. It would be nice if the visible freq
> readout was always up to the minute. But WL knows and gets it right. As
it
> is, this solution maybe not ideal, but still very workable.
>
> 73
>
> Jon
>
> ----- Original Message -----
> From: "David Fister" <dfister@siol.net>
> To: "Jon Harder" <jon@praxisworks.org>; "Writelog reflector"
> <writelog@contesting.com>
> Sent: Sunday, September 16, 2001 16:01 PM
> Subject: Re: [WriteLog] 2 rttyrite windows
>
>
> > Ok, I did that and it is ok if that is my run frequency.
> > But when S&P, only one window, will follow frequency from my radio.That
> > means, I must
> > re-select radio port every time I change frequency/band.Just too much
> > clicking during
> > the contest.
> >
> > 73, David
> >
> > ----- Original Message -----
> > From: "Jon Harder" <jon@praxisworks.org>
> > To: "David Fister" <dfister@siol.net>; "Writelog reflector"
> > <writelog@contesting.com>
> > Sent: Sunday, September 16, 2001 4:00 PM
> > Subject: Re: [WriteLog] 2 rttyrite windows
> >
> >
> > > Yes, just push the frequency button on the second window and select
the
> > same
> > > serial port for logging / duping as for the first. That gives you
the
> > same
> > > radio for both windows and works just fine.
> > >
> > > 73, de Jon K1US
> > >
> > >
> > > ----- Original Message -----
> > > From: "David Fister" <dfister@siol.net>
> > > To: "Writelog reflector" <writelog@contesting.com>
> > > Sent: Sunday, September 16, 2001 12:27 PM
> > > Subject: [WriteLog] 2 rttyrite windows
> > >
> > >
> > > > Hi all!
> > > >
> > > > I am currently playing with dual receive/1radio setup and I would
like
> > to
> > > > know if it is possible to have 2 rttyrite windows opened and only 1
> > radio
> > > > selected.My TU's will be PK232MBX and RITTY.It is working if I
select
> > > > 2 radios in radio menu.
> > > >
> > > > 73 David S51MM
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > WriteLog mailing list
> > > > WriteLog@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/writelog
> > > >
> > > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > >
> >
> >
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|