David, I do know what you're saying. And when I first tried it out I
thought it meant that one radio in two entry windows didn't work. But even
in S&P both windows _ will_ actually be logging the exact frequency. To
me that's really the main point -- an accurate log. And it's great to jump
from MMTTY over to the ST-8000 when the copy is better, and then back and
forth as needed. Worth the small visual inconvenience.
Yes, the little entry window freq readout lags, but over several contests
I've learned to just ignore the freq pushbutton and get on with working 'em
. No need to reselect the radio port. .
This takes a little getting used to. It would be nice if the visible freq
readout was always up to the minute. But WL knows and gets it right. As it
is, this solution maybe not ideal, but still very workable.
73
Jon
----- Original Message -----
From: "David Fister" <dfister@siol.net>
To: "Jon Harder" <jon@praxisworks.org>; "Writelog reflector"
<writelog@contesting.com>
Sent: Sunday, September 16, 2001 16:01 PM
Subject: Re: [WriteLog] 2 rttyrite windows
> Ok, I did that and it is ok if that is my run frequency.
> But when S&P, only one window, will follow frequency from my radio.That
> means, I must
> re-select radio port every time I change frequency/band.Just too much
> clicking during
> the contest.
>
> 73, David
>
> ----- Original Message -----
> From: "Jon Harder" <jon@praxisworks.org>
> To: "David Fister" <dfister@siol.net>; "Writelog reflector"
> <writelog@contesting.com>
> Sent: Sunday, September 16, 2001 4:00 PM
> Subject: Re: [WriteLog] 2 rttyrite windows
>
>
> > Yes, just push the frequency button on the second window and select the
> same
> > serial port for logging / duping as for the first. That gives you the
> same
> > radio for both windows and works just fine.
> >
> > 73, de Jon K1US
> >
> >
> > ----- Original Message -----
> > From: "David Fister" <dfister@siol.net>
> > To: "Writelog reflector" <writelog@contesting.com>
> > Sent: Sunday, September 16, 2001 12:27 PM
> > Subject: [WriteLog] 2 rttyrite windows
> >
> >
> > > Hi all!
> > >
> > > I am currently playing with dual receive/1radio setup and I would like
> to
> > > know if it is possible to have 2 rttyrite windows opened and only 1
> radio
> > > selected.My TU's will be PK232MBX and RITTY.It is working if I select
> > > 2 radios in radio menu.
> > >
> > > 73 David S51MM
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > WriteLog mailing list
> > > WriteLog@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/writelog
> > >
> > >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
>
>
>
|