That did it!!! Thanks for the help!
Gary N2UM
----- Original Message -----
From: "WA9ALS - John" <jfleming@shelbynet.net>
To: "Wink" <wink@rpa.net>; <writelog@contesting.com>
Sent: Friday, December 08, 2000 1:41 PM
Subject: Re: [WriteLog] IC-706MkIIG Problem
> YAY - Something I know for a change! Writelog expects the IC-706 at 48H.
> You can change that in the radio's menu. Check the manual to see how. I
> use it all the time...
>
> Not sure the history of this - maybe the original 706 was 48H when Wayne
did
> the development. Anyway, it works great.
> ---------------------------------
> WA9ALS - John
> jfleming@shelbynet.net
> http://www.qsl.net/wa9als
> ---------------------------------
> ----- Original Message -----
> From: "Wink" <wink@rpa.net>
> To: "Wink" <wink@rpa.net>; <writelog@contesting.com>
> Sent: Friday, December 08, 2000 2:53 PM
> Subject: [WriteLog] IC-706MkIIG Problem
>
>
> >
> > I've been using Writelog 10.22 with my IC-746 for several weeks
> without
> > any problems. The 746 is in for repair and I want to use my IC-706MkIIG
> for
> > this weekend's 10 meter contest. I've set the radio port to 706 in the
> port
> > setting screen. The radio's address is 58h. The baud rates are the
same.
> > I'm using a W1GEE LCU-3I interface. The 706 and interface work well
with
> > Logger but so far I've been unsuccessful communicating with Writelog.
> What
> > am I doing wrong?
> >
> > Thanks,
> >
> > Gary N2UM
> >
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> >
>
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|