Do you see the com port in device manager?
On Mon, Jan 9, 2023, 7:23 PM Michael Davis <michael@bassettconsulting.com>
wrote:
> Hello Terry,
>
> Forgot to mention that the K3S configuration is set to USB.
>
> 73,
>
> Michael KB1JEY
>
> >
> >
> >
> >
> > Hello Terry,
> >
> >
> > FYI.
> >
> >
> >
> >
> >
> > 73,
> >
> >
> > Michael KB1JEY
> >
> >
> > ------
> >
> >
> > > Michael,
> >
> > >
> >
> > > Right click on the start icon in Windows and select device manager
> > from
> >
> > > the
> >
> > > drop down. In device manager select com ports. When you plug in the
> > USB
> >
> > > cable a new com port should appear if you have the correct FTDI
> > driver
> >
> > > loaded
> >
> > >
> >
> > > Have you verified in the K3S menu that the com port is set to
> > USB?
> >
> > >
> >
> > > Terry
> >
> > >
> >
> > > On Mon, Jan 9, 2023, 7:06 PM Michael Davis
> > <michael@bassettconsulting.com>
> >
> > > wrote:
> >
> > >
> >
> > >> Hello Scott,
> >
> > >>
> >
> > >> The problem is not the logging program. It is getting the K3S
> > to
> >
> > >> communicate with WSJT-X
> >
> > >>
> >
> > >> Hello Terry,
> >
> > >>
> >
> > >> Where would I find VCP in Device Manager?
> >
> > >>
> >
> > >> 73,
> >
> > >>
> >
> > >> Michael KB1JEY
> >
> > >>
> >
> > >> --
> >
> > >> Michael L. Davis
> >
> > >> 533 Tennis Avenue
> >
> > >> Ambler, PA 19002-6016
> >
> > >> email: Michael.Davis@alumni.duke.edu
> >
> > >> mobile: 203-562-0640
> >
> > >>
> >
> > >
> >
> >
> >
> >
> >
> > --
> >
> > Michael L. Davis
> >
> > 533 Tennis Avenue
> >
> > Ambler, PA 19002-6016
> >
> > email: Michael.Davis@alumni.duke.edu
> >
> > mobile: 203-562-0640
> >
> >
>
>
> --
> Michael L. Davis
> 533 Tennis Avenue
> Ambler, PA 19002-6016
> email: Michael.Davis@alumni.duke.edu
> mobile: 203-562-0640
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|